Matrika izdelkov AKCP
Primerjava osnovnih enot
|
|
|
|
|
|
|
Dimension |
Size 4.5″ x 2.5″ x 1.25″ |
Size: 8.5″ x 5.43″ x 1.80″ 1U Rack Mount Standard |
Size 8.5″ x 5.43″ x 1.80″ |
Size: 8.5″ x 5.43″ x 1.80″ (camera dome height 3.62″) |
|
Weight |
0.242 pounds |
1.72 pounds |
2.2 pounds |
2.4 pounds |
|
Mounting |
0u rackmount, or wall hanging |
1U rackmount includes rackmountkit. |
1U Rack Mount Standard |
Rack mount brackets included |
|
Status Indication |
LED indication for Power LED for Network Connectivity LED for Sensor online and threshold status |
LED indication for Power LED for Network Connectivity LED for Sensor online and threshold status |
LED indication for Power LED for Network Connectivity LED for sensor online and threshold status |
LED indication for Power LED for Network Connectivity LED for Sensor online and threshold status |
|
Interface ports |
Standard 10 Base-T Ethernet RJ-45 |
Standard 10 Base-T Ethernet RJ-45 |
4x RJ-45 Expansion Ports< 115.2K BPS Data Transfer Rate Simultaneous functionality between Expansion Ports & RS485 port threshold status |
1 RS485 Modbus port 1 Standard 10/100 Base-T Ethernet RJ-45 port |
|
Power Requirements |
7.0 – 9 V/> = 1 Amp |
7.0 – 9 V/>= 1 Amp |
7.0 – 9 VDC, 3Amp |
7.0 – 9 V/>= 3 Amp |
|
Power Consumption |
Typical 1.125 Watt, 0.15A |
Typical 1.425 Watt, 0.19A |
Typical 5.025 Watt, 0.67A |
Typical 6.150 Watt, 0.82A |
|
Input |
2 RJ-45 ports for connecting AKCP Sensors Configurable analog inputs on any of the 2 RJ-45 Sensor ports(0-5VDC) |
8 RJ-45 ports for connecting AKCP Sensors Configurable analog inputs on any of the 8 RJ-45 Sensor ports(0-5VDC) |
8x RJ-45 Sensor Ports 4x RJ-45 Expansion Ports 1x USB port (Version 2.0) Audio In (Analog) 2.5″ jack RS485, 2 Pin Terminal box, (used for Modbus) |
8 RJ-45 ports for connecting AKCP Sensors Video Input port VI-4, NTSC/PAL, Jack BNC 750 hm 30 Au 1 USB port (Version 1.1) RS485, 2 pin Terminal box Line In, 3.5mm jack 4x E-in for expansion module input |
|
Output |
Configurable output signals (0VDC/5VDC) on any of the 2 RJ-45 Sensor ports |
Configurable output signals (0VDC/ 5VDC) on any of the 8 RJ-45 Sensor ports |
Ext. Speaker Out, 2.5″ jack (Analog) Mic Out, 2.5″ jack (Analog) (For modem application) |
Ext. Speaker Out, 2.5″ jack (Analog) Mic Out, 3.5mm jack (Analog)M (for modem application) |
|
Operating Environment |
Temperature : Min. -35°C – Max. 80°C Humidity : Min. 20% – Max. 80%(Non-Condensing) |
Temperature : Min. -35°C – Max. +55°C Humidity : Min. 20% – Max. |
Temp : Min. -35° C – Max. +55° C Humidity : Min. 20% – Max. 80% (Non-Condensing) |
Temperature : Min. -35°C – Max. +55 C Humidity : Min. 20% – Max. |
|
Components |
Manufactured using highly integrated, low power surface mount technology to ensure long term reliability. |
Manufactured using highly integrated, low power surface mount technology to ensure long term reliability. |
Manufactured using highly integrated, low power surface mount technology to ensure long term reliability. CPU: AKCP i.MX25 Processor On-board SD Flash Slot |
Manufactured using highly integrated, low power surface mount technology to ensure long term reliability. 32-bit Xscale PXA270 520 MHz Processor running Linux Kernel 8 MB Flash memory 128 MB SDRAM 2 Gb SD Card |
